Pavers in Cape Coral, FL, matched with local installers
Free matching for paver patios, driveways, pool decks and walkways in Cape Coral and nearby Lee County towns. Tell us about the area and a licensed local installer calls you to set up a visit.
Free match · No obligation · Cape Coral Paver Pros is a referral service, not a contractor. Work is done by independent, licensed local contractors.
Paver services matched in Cape Coral
New patios, driveways, pool decks and walkways are the main work. Sealing, repair and borders are side services.
- Paver patiosA new patio, a cracked slab replaced or a small builder patio made bigger.
- Paver drivewaysNew paver driveways and old concrete driveways replaced, on a deeper base.
- Pool deck paversPool decks and coping in travertine or concrete pavers, inside or outside the lanai.
- Walkways and pathsFront entry walks, side yard paths and garden walkways.
- Paver sealingCleaning, new joint sand and sealer for pavers that are already down.
- Paver repair and levelingSunken, rocking or shifted pavers lifted, the base fixed and the pavers reset.
- Paver borders and edgingBorder courses and edge restraint that frame a surface and hold it together.
Patio, driveway or pool deck
Most paver requests around Cape Coral are one of these three. Prices are published Florida ranges, not quotes.
Patios
A new patio, a cracked slab replaced, or a small builder patio made big enough to use. Published Florida guides put most at $12 to $25 or more per square foot.
More on patiosDriveways
A deeper base and a pattern that holds under turning tires, often herringbone. Published guides put a 600 square foot driveway at $7,200 to $15,000 or more.
More on driveways
Pool decks
Travertine or light concrete pavers that stay cooler underfoot, with coping priced on its own line. Published guides put pool decks at $15 to $30 per square foot.
More on pool decksIdeas for a Cape Coral home
Stock photos for ideas, not jobs by a matched installer
How matching works
Send a request
Call or send the form with the town, the area and what you want changed.
Get matched
We pass it to an independent, licensed installer who takes that work in your town.
Site visit
The installer measures, checks the ground, the slope and the drainage, and talks through materials.
You decide
You get a written price and decide. No charge for the match and no obligation to hire.
Built for Florida ground
What Cape Coral ground and weather ask of a paver job
Four things decide whether pavers stay flat here. They are worth bringing up when the installer visits.
Sandy ground
Southwest Florida soil is mostly sand. It drains well but it shifts, so the compacted base under the pavers does the real work. A driveway needs a deeper base than a patio. If one bid is far lower than the rest, ask what base depth and edge restraint it includes.
Summer storms
Heavy rain can wash joint sand out and leave room for weeds. The surface should slope away from the house toward a spot where water can drain, not toward a neighbor or into a canal. Sealing helps hold joint sand, but it can't fix pavers laid without slope.
Salt air and pool water
Near the coast and along canals, metal edging and some sealers age faster. Pool decks also take chlorine and strong sun. Ask which sealer and edging suit your lot, what upkeep they need, and how much grip the surface has when it's wet.
Trees and roots
Roots can lift pavers over time, and a patio under a big tree collects leaves and sap. Point out trees, sprinkler lines and downspouts near the area, because they change the base plan and the layout.
Patterns and materials
Patterns, side by side
The pattern changes the look, how well the surface holds up under weight, and how much cutting the job needs.
| Pattern | What it looks like | Best for | Cost note |
|---|---|---|---|
| Running bond | Simple staggered rows, like a brick wall laid flat | Patios and walkways | Often the lowest labor cost |
| Herringbone | Pieces locked together in a zigzag | Driveways, where tires turn and push | More cuts along the edges |
| Basket weave | Pairs set at right angles, like a woven square | Patios with a classic look | Close to running bond |
| Border course | A frame of a contrasting color or larger pieces | Any area, and it helps the edge stay put | Often a separate line on the quote |
| Curves, circles and inlays | Custom shapes set into the main area | A feature spot by the pool or entry | Adds cutting time and cost |
A simple rectangle is usually the lowest cost for a given size.
Materials in plain terms
Published per square foot ranges from one Florida guide, installed. Your installer can bring samples so you can see them in your own light.
| Material | Published range | Good to know |
|---|---|---|
| Concrete pavers | $12 to $18 per sq ft | The common choice for patios, driveways and pool decks, in many colors and shapes |
| Travertine | $14 to $28 per sq ft | Natural stone that stays cooler underfoot, which is why it shows up around so many pools |
| Brick and clay | $14 to $22 per sq ft | A traditional red look for patios, walkways and borders |
| Porcelain and natural stone | $22 to $32 per sq ft | A specific style at a higher price. Porcelain needs its own setting method, so ask how it will be laid |
Source: Pavers Orlando Co. Every range, with its link, is on the cost guide.
Planning a budget
A rough budget in three steps
Not a quote, just a way to know what to expect before the installer visits.
- 1
Measure the area
Length times width gives square feet. Pacing it off is close enough to start.
- 2
Use a published range
Florida guides put most paver installs at about $12 to $25 per square foot with base, sand and labor included. On that range, a 400 square foot patio comes to about $4,800 to $10,000.
- 3
Add the extras
Removing an old slab, a deeper driveway base, a border, pool coping and sealing are often separate lines. One Florida guide puts sealing at $1.25 to $3.50 per square foot.
Small jobs cost more per square foot, because setup, cutting and edge work don't shrink with the size. The installer gives the real price after measuring. Sources are on the cost guide.
Before you ask for a price
Have these ready and the visit goes faster
- The address, so the installer knows the town and the rules that apply there
- A rough size, even if you paced it off
- What's there now: grass, concrete, old pavers or bare sand
- Any standing water, soft spots or sinking after rain
- Trees, sprinkler heads, pool equipment and downspouts near the area
- Extras you want, like a border, a certain color or new pool coping
- Your HOA rules, if your community has them
- A few photos of the area, if you're sending the form
A referral service, not a contractor
Cape Coral Paver Pros matches Cape Coral homeowners with independent, licensed local paver installers. It does not install pavers, employ crews or set prices.
- Free to youThere is no charge for the match and no obligation to hire the installer who calls.
- Licensed installersRequests go to independent, licensed local contractors. Ask for license and insurance details before work starts.
- Built for sandy groundAsk about base depth, slope away from the house and edge restraint, the things that keep pavers flat here.
- The price is theirsThe installer quotes after measuring. Any contract, price or warranty is between you and them.
Where we match paver installers
Cape Coral and nearby Lee County towns. Not on the list? Call and ask.
Questions about getting matched
Is Cape Coral Paver Pros a contractor?
No. Cape Coral Paver Pros is a referral service. It matches homeowners with independent, licensed local contractors, and the matched installer does the work and sets the price for the job.
Does a quote cost anything?
No. Sending the form or calling is a free request for a match. A matched installer can then visit, measure the area, and give a price for that specific job.
What should I put in the message?
Describe the area, its approximate size if you know it, the surface that is there now, and any problems such as sinking, standing water, or loose pieces. Photos are not collected by this form.
Do installers work in my town?
The service covers Cape Coral and nearby Southwest Florida towns listed on the areas page, including Fort Myers, North Fort Myers, Fort Myers Beach, Lehigh Acres, Bonita Springs, and Estero.
What if I only need sealing or a repair?
Sealing and repair are listed as services, but they are side services. The main work matched through this site is new paver patios, driveways, pool decks, and walkways.
How do I choose a paver material?
Concrete pavers are the common choice and are often the lowest cost of the main options. Travertine stays cooler underfoot around a pool. Brick gives a traditional look. Porcelain and natural stone cost more and suit a specific style. Your installer can show samples and explain how each one handles heat, rain, and pool chemicals.
Do I need a permit for pavers in Cape Coral?
It depends on the project and the address. A driveway change, a new patio, or work near a canal or pool cage can each fall under different rules. Ask the matched installer what approvals your address needs before work starts, and get the answer in writing as part of the price.
Should new pavers be sealed?
Sealing helps hold joint sand in place through summer storms and makes cleaning easier. Ask the installer when they recommend sealing new pavers, which sealer suits your spot, and how often it needs redoing. Sealing won't fix pavers that were laid without proper slope.
Why is one quote so much lower than the others?
Usually because it leaves something out. Base depth, edge restraint, removing the old surface, pool coping and sealing are where bids differ most. Ask each installer for the same written breakdown and compare it line by line, not just the total.
Will the installer remove my old concrete or pavers?
Many do. Taking out an old slab or old pavers and hauling them away is usually priced as its own line, because it adds labor and disposal. Check that it is on the written quote, so two quotes for the same area are really the same job.
Get matched with a paver installer in Cape Coral
Tell us about the area and a licensed local installer will call you to set up a visit and a written price. The match is free.
- Call(239) 323-5851
- Text(855) 768-8391
- Cost to youFree match, no obligation
Get a quote
Your request goes to a licensed local installer, who calls you to set up a visit. The match is free.
Request sent
Your request is in. A licensed local installer will call you to set up a visit.
Want to talk now? Call (239) 323-5851.
